All ALU STAR LED counters can also be equipped with a rechargeable battery. This means that the light counter is not dependent on a power socket and can be placed centrally on the exhibition stand if required. Battery specification Rechargeable 24 volt lithium-ion battery - 11Ah incl. cable and chargerWeight: 2.8 kgDimensions of battery: 40 x 7.5 x 11 cmRunning time: 9 hoursRecharge time: 5 hours

The accessories are suitable for all beach flag shapes and sizes.

The accessories are suitable for Budget Tents in all sizes.

With the PIXLIP GO System Connector Flex, not only can LED exhibition walls be stably connected "around corners", but also semi-circular or bevelled LED presentation walls. The unobtrusive plastic elements are simply pushed onto the top and bottom of the respective corners of the frames that are to be connected. Thanks to the identical design, the attached FLEX connector remains almost invisible to the observer.

The PIXLIP GO connector set includes the following accessories: 1. The PIXLIP GO system connector Top can be used to connect frames of the same height to form a stable wall. To do this, the small plastic parts are pushed into the respective system groove of the two frames at the top and bottom so that they are aligned exactly in line with each other.2.Unlike the PIXLIP GO Top connector, the Step system connector allows two frames of different heights to be combined to form a stable presentation wall. The small plastic element is pushed from above into the respective system groove of the two frames and can be flexibly adjusted in height.3.The PIXLIP GO closing cap can be used to close the unused cable passages in the corner angles. To do this, the plastic particles are pressed into the frame recess from the inside to prevent light from escaping from the side there.4. The GO Print Clip makes it easier to insert the textile in the frame and is gentle on both pressure and fingernails. The small plastic elements are simply attached to the edges of the textile from the inside and pushed into the profile corners. From there, the rubber lip of the print can be pushed into the profile groove.

The accessories are suitable for the products "TravelStand PRO Curved" and "TravelStand PRO Straight".